Posts

Showing posts with the label 3dPrinting

V-22 Osprey Project - Design Changes for v3

Image
It's been a busy end of 2021, and as we start 2022 I'm getting closer to building version 3 of the Osprey wing.  The single biggest problem I've faced is the amount of backlash in the direct spur gear drive of the tilt mechanism.  It introduces some nasty instability that, left unchecked, would likely destroy the model in flight. I've investigated other tilt mechanisms, but the one I keep coming back to is the rack and pinion design that Tom Mast uses in his model at Rotormast.  His design uses a high-torque digital servo with a small pinion gear driving a rack attached to the rotor nacelle.  The servo has been modified with an external potentiometer that's driven by a gear on the translation tube to give positional feedback to the servo.  I like this design a lot because 1) It works, and his model is proof, and 2) it requires less torque from the servo and has less backlash. I ordered the pair of modified servos, potentiometer, and rack from Tom's site and star...

Mechanical 7-segment Clock

Image
I saw this design on Thingiverse a few weeks ago.  I believe it was also featured in Make Magazine's blog.   Mechanical 7-segment Display, simple and smooth It's such a cool design that I had to make a clock out of it.  Note that the designer, Shinsaku Hiura , also has a full clock made from another of his designs.  I printed out 4 copies of the design using Hatchbox and Overture PLA.  Instead of painting just the faces of the moving arms I chose to print the entire part in white.  The movement is controlled by 4x 9-gram servos .  I had a leftover  Arduino Nano  to control the system.  The time is read from a  DS3231 real-time clock module  and a momentary pushbutton switch is used to switch between the clock and the date.  The switch triggers an interrupt in the code and makes the clock change the display to the date (MM / DD) format for 5 seconds before reverting back to the time in 24-hour format.  The clock ...

Failed Print and Recovery

Image
I was able to turn a printer fail into a success. I started printing a toilet for my daughter's 18" American Girl doll. I scaled up this model ( https://www.thingiverse.com/thing:1866716 ) by 304% to get the appropriate size. Final height is ~180mm. I rotated and sliced the model into a tank and bowl parts. The bowl was going to require supports for a couple areas, but that was no problem.  I set it up to print both parts at 0.20 layer height and let it rock. To my horror the next morning I came in and saw this: I thought 15 hours of printing was lost. I searched the forums for what this error meant, and it turns out that the thermistor that reports the bed temperature had come loose.  To protect itself and our home, the printer aborts whatever it's doing when this occurs.  I took the bed off, fixed the loose bed thermistor, reassembled everything, and recalibrated the bed. I'm glad I took the photo of the failure screen because it told me it was printing at 61m...

New Hobby - 3D Printing

Image
I've been wanting a 3D printer for quite a while, but we could never really justify the cost.  A couple of co-workers were raving about the Prusa i3 Mk2 (http://www.prusa3d.com/) and all the awards it had just won.  I had looked around at others as well, but the general consensus was this was the real deal.  The only thing I had to do now was convince my wife. She asked the typical questions: "What are you going to do with it?" "It's so expensive!" "You'll just print little doo-dads."  "That's an expensive toy!" What guy's toy isn't expensive, huh?  It wasn't until she saw that it could print doll furniture that she was hooked as well. My co-workers and I all ordered our printers within a month or so, but with a 2 month backlog at Prusa the wait was killer.  Finally, my kit arrived!  I spent the first evening into the wee hours assembling the main bed.  Wow!  This thing is like IKEA on steroids!  The next day I spe...